Twistor T self-adjusting crimping pliers for wire end ferrules 0.14 to 10 mm², rotatable crimping head, 200 mm - Knipex 97 53 19

Crimping wire end ferrules repeatably costs time when the pliers have to be readjusted at every change of cross-section. The Twistor T 97 53 19 adjusts itself across the whole range from 0.14 to 10 mm² and crimps with a trapezoidal profile, while the crimping head can be rotated through 360 degrees into eight locking positions.

Benefits

• Crimping head rotates through 360 degrees with 8 locking positions, so ferrules can be crimped from almost any working position.
• Self-adjusting from 0.14 to 10 mm², matching AWG 26 to 8, with no changeover between cross-sections.
• Crimp opening accessible from both sides, up to 18 mm of length in one operation, extra-long ferrules can be fed through.
• Twin wire end ferrules up to 2 x 6 mm² can be crimped.
• Ratchet mechanism for a consistently high crimp quality, unlockable when needed.
• Toggle lever mechanism reinforces the manual force, the tool stays light and handy at 486 g.

Areas of use

Control cabinet building, control system construction, electrical installation and service work on machines and plants. The rotatable head pays off wherever ferrules are crimped in the installed state and the pliers cannot be guided freely.

Standards and conformity

The manufacturer does not state a tool standard for this product. According to the manufacturer the tool contains substances of very high concern under REACH. The RoHS directive does not apply.