Smart Micro soldering and desoldering tweezers WXMTS set, 80 W, with WSR 210 rest - Weller T0051321299

Rework on small SMD parts is decided by the seconds spent on the pad. The Smart Micro desoldering tweezers WXMTS reach working temperature in 5 seconds and split 80 W at 12 V across both arms, so both joints release at the same time. The WSR 210 safety rest and the RTWMS 030 K twin tip are included, so the bench is complete on delivery.

Benefits in use

• 80 W at 12 V, heat-up time of 5 seconds, working range 100 to 450 °C for leaded and lead free alloys.
• Active Tip Cartridge System, the tip can be changed hot and without an extra tool.
• Paired pre-aligned tips and a parallel sliding block guide remove the alignment step after a tip change.
• Fine adjustment with a 1.5 mm Allen key, rotation of ±80° and vertical length of ±1.2 mm.
• Smart tips with automatic tip offset plus an RGB signal function with 12 selectable colours.
• Parameter memory inside the tool for standby temperature and shut-off time, valid on any WXsmart station.

Applications

Repair and rework on assembled boards, prototype work, laboratory and test departments. The slim body with a short distance between grip and tip suits work under a microscope, for example on 0402, 0201 and 01005 packages.

Compatibility and scope of delivery

Connects to the WXsmart control unit. It works with the WSR 210 safety rest and with the RTWMS and RTWPS tip ranges. Delivery covers the WXMTS desoldering tweezers, the WSR 210 safety rest and the RTWMS 030 K twin tip.

Standards and compliance

Built to military standard, Mil-Spec compliant and tested to IPC-TM-650 2.5.33 for electrical overstress from soldering hand tools.