Micro desoldering tip knife 10 x 1 mm RTWMS 100 K for WTMT and WXMTS - Weller T0050116499

The micro desoldering tip RTWMS 100 K handles component removal with two heated tips. It works with 80 W at 12 V, is ready after 5 seconds and covers a control range of 100 to 450 °C. The geometry is knife and straight with a tip width of 10 mm.

Benefits

• 80 W total power at 12 V, so the tip reaches the set temperature between 100 and 450 °C within 5 seconds
• Knife geometry, straight, tip length 18.2 mm, tip width 10 mm, tip thickness 1 mm, suited to large SOIC and TSSOP packages as well as pin headers
• Tip change through the Active Tip Cartridge System without tools and without cooling the tweezers down
• Pre-aligned pairs remove realignment after a change, and an Allen key of 1.5 mm allows ±80° rotation and ±1.2 mm vertical adjustment when needed
• Tip identification with stored ID number, tip offset and tip lock for traceability and fixed process parameters
• Short distance between tip and handle plus a parallel sliding block guide for precise positioning on the component

Applications

Rework and repair in electronics manufacturing, in the lab and in the test area. The tip shape suits large SOIC and TSSOP packages as well as pin headers. The property table does not list the tip as ESD safe.

Compatibility and scope of delivery

The matching handpieces are the WTMT and WXMTS desoldering tweezers. The change runs through the Active Tip Cartridge System and needs no extra tool. Sales unit is 1 piece, the packaging measures 98 x 36 x 27 mm.

Standards and compliance

The series is Mil-Spec compliant and meets the IPC test method IPC TM-650 2.5.33 for measuring electrical overstress from soldering hand tools.