6x SLWD interchangeable objective for Mantis PIXO and ERGO, 114 mm working distance - Vision MTO007

On a Mantis the objective decides how fine the inspection can get and how much room stays between optics and workpiece. This interchangeable objective fills the 6x SLWD step in the objective changer of the head. The SLWD version keeps 114 mm of working distance at 6x, enough room to solder, place parts and probe underneath the optics.

What this objective changes at the head

• Magnification 6x SLWD at 114 mm working distance, which fixes the trade off between detail and clearance below the optics.
• Tool free change through the objective changer of the Mantis head, with up to three objectives fitted at the same time.
• Matched to the Mantis PIXO and Mantis ERGO heads, so the stereo image stays low in distortion across the range.
• With the MTA310 protective glasses the front lens can be covered against solder splash and flux, which protects the expensive optics.

Applications

• Soldering and reworking underneath the optics
• Placing small components with tweezers
• Probing and measuring on the assembly
• Rework on densely populated boards

Compatibility

The objective fits the objective changer of the Mantis PIXO and ERGO heads, among them the MPH003 and MRH002 versions. It goes together with the MTA310 protective glasses, the MTA350 epi illumination and the VERSO universal stand MTB200 with the MTB201 extension, the MTB211 base plate and the MTB220 gliding stage. Mantis IOTA heads take the MTO103 to MTO108 objectives instead.