Ratcheting combination wrench 8 mm, 15° open end, double hex, chrome-plated - Bahco 1RM-8

At 8 mm across flats the nut usually sits deep between components. The ring end of this wrench ratchets, so it stays on the fastener while you tighten, and a 5° swing-back angle is enough for the next pull. At 140 mm overall length and 38 g it also works in shallow recesses.

Benefits in use

• Ratchet in the ring end: the nut is turned on without repositioning. The swing-back angle is 5°, so a narrow arc of movement is enough.
• Reversing lever on the head: the direction of rotation is switched on the wrench itself, no need to turn it over to loosen a fastener.
• Open end and ring angled at 15°: the head is kept thin and reaches fasteners next to flanges, panels and ribs.
• Double hex with Dynamic-Drive profile: force is carried by the flats instead of the corners, which extends the service life of screws and nuts.
• High-performance steel alloy: chrome-plated micro-matt finish, the surface wipes clean and resists corrosion.
• Size marked on both sides: the 8 mm marking is large and readable from either side, so the right wrench is picked faster out of a set.

Applications

• Fine assembly on devices, enclosures and modules
• Maintenance on machines with tight access to the fastener
• Electrical and control cabinet construction
• Inspection and field service work

Compatibility and scope of delivery

Supplied as one wrench with 8 mm across flats, sales unit and content unit are 1 piece. The double hex fits hexagon and twelve-point profiles of this size, the open end grips the hexagon from the side. No battery is included and none is required. The 1RM line is also available as a set in a plastic holder.

Standards and conformity

The manufacturer cites ISO 1711-1 and DIN 3113 for this design. Bahco is the manufacturer. The property table lists the wrench as not ESD safe, so it is not intended for a workplace set up to IEC 61340-5-1. Country of origin, customs tariff number and EAN are not documented for this item.