Combination wrench 7 mm, flat design, 12-point, chrome-plated, 120 mm - Bahco 111M-7

The Bahco 111M-7 combination wrench works 7 mm fasteners from two sides, with an open jaw and a closed ring. The flat design keeps overall height at 5.3 mm, so the tool passes under covers and between closely mounted parts. Overall length is 120 mm at a weight of 21 g.

• U-shaped shank instead of a plain flat bar, the edge presses less into the palm while tightening.
• Double hexagon with Dynamic-Drive profile, load is applied to the flats of the fastener rather than its corners, which keeps heads dimensionally sound over many cycles.
• Open jaw angled at 15 degrees on a thin head, reaching fasteners close to walls and neighbouring parts.
• Ring end offset by 15 degrees, keeping the hand clear of the joint while turning.
• Chrome-plated micro-matt finish on a high-performance steel alloy, with enlarged and legible size markings on both sides.

Technical data

Applications

Fine assembly in electronics and equipment manufacturing, maintenance on control cabinets and assemblies, laboratory and service work. The small 7 mm size is used on terminals, glands and fixings in confined spaces.

Scope of delivery

1 piece Bahco 111M-7 combination wrench in SB packaging. Sales unit and content unit are 1 piece each.

Standards and compliance

The wrench conforms to ISO 691, ISO 7738, ISO 3318, ISO 1711-1 and DIN 3113. It is not an ESD version, the property table states ESD safe as no. Work on live parts calls for VDE tools tested to IEC 60900 instead.