Thinner for ECS Plastic Clear Coat, 1 Litre, for Spray and Dip Application - ECS 775.L01.000

How well a protective coating flows depends on its viscosity. This thinner sets ECS PLASTIC to the application method: 1:1 for thin spray coats with very good levelling, 3:1 for a higher film thickness.

Benefits

• Matched to ECS PLASTIC, flow behaviour adjustable through the mixing ratio.
• Spraying at 1:1 gives thin coats with very good levelling.
• Mix of 3 parts concentrate to 1 part thinner for thicker coats.
• Suitable for spray application and dipping, 1 litre container.

Applications

Adjusting the working viscosity of ECS PLASTIC for spray guns, spray systems or dip tanks in electronics production, maintenance and the workshop.

Notes

The mixing ratio depends on the spray or dip process and the desired flow. Water-based solvents and alcohols must not be used for thinning.