Images are examples, some edited with AI. The technical data are authoritative. AI notice
ESD Table Mat Premium Black 1200 x 600 x 2 mm, Two-Layer, 2x 10 mm Press Stud - Safeguard SG-TM-SW-GL-2DK-600X1200X2
Two-layer ESD table mat made of natural and synthetic rubber, size 1200 x 600 x 2 mm, for a full soldering station or assembly bench. With a surface resistance of 10⁶ to 10⁷ ohms it dissipates charges in a controlled way, withstands solder and heat and is earthed via two 10 mm press studs.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
An ESD table mat has two jobs: dissipate charges in a controlled way and cope with daily work at the soldering bench. This black premium mat in 1200 x 600 x 2 mm does both, with a surface resistance of 10⁶ to 10⁷ ohms to EN 61340-2-3 and a heat and solder resistant surface.
Key benefits
- Two-layer construction, dissipative and conductive, volume resistance 10⁶ ohms
- Heat and solder resistant, glow wire test to IEC 60335-1 up to 750 °C, so it also works as a soldering mat
- Resistant to chemicals, oil and grease (ASTM D471)
- Permanently elastic and abrasion resistant (abrasion below 200 mm³ to ISO 4649), the mat stays flat
- Anti-reflective matt surface for comfortable work under bright lighting
- Two 10 mm press studs for connection to the earthing system
Applications
Soldering stations, electronics assembly, repair and test benches in the EPA. The mat covers the work surface where assemblies are placed and processed.
Earthing
The press studs accept standard earthing cables with a 10 mm press stud. The cable is not included.
Standards and compliance
ESD certified to IEC 61340-5-1, resistance measured to EN 61340-2-3, RoHS compliant.
Technical data
| Type | Table mat |
|---|---|
| Length | 600 mm |
| Width | 1200 mm |
| Thickness | 2 mm |
| Colour | black |
| Material | Natural rubber and synthetic rubber |
| Construction | two-layer, dissipative and conductive |
| Typical surface resistance Rpp (EN 61340-2-3) | 10⁶ to 10⁷ ohms |
| Typical volume resistance RV (EN 61340-2-3) | 10⁶ ohms |
| ESD certification to IEC 61340-5-1 | yes |
| Hardness (ISO 7619) | Shore A 75 |
| Residual indentation (EN ISO 24343-1) | < 0.20 mm |
| Abrasion (ISO 4649, method A, 5 N) | < 200 mm³ |
| Flexibility (EN ISO 24344, method A, 20 mm mandrel) | passed |
| Glow wire test (IEC 60335-1:2010) | up to 750 °C |
| Needle flame test (IEC 60695-11) | up to 30 s |
| Dynamic coefficient of friction (EN 13893) | > 0.30 |
| Stain resistance (EN ISO 26987) | resistant, depending on concentration and contact time |
| Oil and grease resistance (ASTM D471) | limited change in volume and mass |
| RoHS compliant | yes |
| Corners | rounded |
| Cleaning | with a suitable ESD cleaner |
| Sales unit | 1 piece |
| Weight | 2.1 kg |
| Manufacturer | Safeguard |
| Manufacturer Nr. | WL83994 |
| HS-Code | 40169997 |
| GPSR manufacturer information | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | Germany |
| ESD version | ESD (antistatic) |
Downloads
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
