Allround 3 high stool with foot ring and glides, natural beech, seat 560-830 mm, blue ring - Bimos 9461-3000-3277

At benches and test stations with a high work surface, an ordinary stool runs out of travel at around 650 mm. The Allround 3 stool reaches 830 mm seat height and brings its foot ring along, so the legs find support in the upper position as well. The natural beech plywood seat shell takes neither oil nor cleaning agents badly and stands up to changing shifts.

At a glance

• Seat height 560 to 830 mm, that is 270 mm of travel via a gas spring with ring release, operated while seated and without tools.
• Glides instead of castors, the stool keeps its position while climbing on and sitting down.
• Foot ring as standard, it takes the weight of the legs in the upper half of the adjustment range.
• Seat shell in natural beech plywood, wipe-clean and insensitive to swarf and cleaning agents.
• Footprint of only 54 cm diameter, which keeps circulation space between workstations clear.
• Colour ring in blue, so stools can be assigned to workstations, areas or shifts.

Applications

The stool 3 is intended for high work surfaces, that is benches, inspection and measuring stations, laboratory runs, counters and machine setup positions. The foot ring makes the upper seat height usable over longer periods as well.

ESD note

This version is not conductive, the property table lists ESD-safe as no. For workstations inside an EPA to DIN EN 61340-5-1, choose the dissipative E version of the stool system, in which cover, base and floor contact are matched to one another.