Brushless ESD electric screwdriver with lever start, 20-50 Nm, 230 rpm, 150 W - Kilews SKD-RBK500L-ESD

Heavy fastening without compressed air and without torque drift caused by line pressure: the SKD-RBK500L-ESD delivers up to 50 Nm from a 150 W motor and shuts off via its clutch with ±5 % repeatable accuracy. It replaces pneumatic screwdrivers at stations where every tightening torque has to be right.

Benefits in use

• Brushless motor with no carbon dust and low noise, also suitable for clean production areas.
• Stepless torque adjustment, 20 to 50 Nm on hard joints and 20 to 40 Nm on soft joints.
• Machine screws up to 14 mm and tapping screws up to 12 mm diameter.
• Bit type: square drive 1/2 inch.
• ESD version for use in electrostatic protected areas (EPA).
• Prepared for an auxiliary arm and handle grip, so reaction torque is not absorbed by the wrist.

Applications

Assembly of automotive parts, air conditioning and electrical equipment, telecommunications, large appliances and medical devices, wherever screws in the upper torque range must be tightened reliably.

Operation and accessories

The screwdriver runs on DC 40 V from the SKP-40B-HL-800 power controller. Accessories listed by the manufacturer include a spiral cable and the KL-2000 spring balancer. The lever start lets the operator seat the tool cleanly before starting the run.

Standards and compliance

CE marked, RoHS compliant.