WT 1010M single channel micro soldering set with WTMP MS iron, 95 W - Weller T0053448699

Small components do not tolerate long heat cycles. The WT 1010M set pairs the 95 W WT1M supply unit with the WTMP MS micro soldering pencil, whose active RTM cartridge tips reach working temperature in 5 seconds. The bench is ready straight away, with no need to source iron, tip and rest separately.

Benefits in use

• Active tip technology of the RTM family with a 5 second heat up time, so the tool never keeps the operator waiting.
• 95 W of controlled power from 50 to 450 °C at ±2 °C stability, ground planes do not pull the temperature down for long.
• WSR 205 safety rest with stop and go, the iron lowers its temperature while parked and the tip lasts longer.
• More than ten tools of the WT range fit the same supply unit, so the set can grow into a desoldering or rework position later.
• Stackable housing with a usable cover and a connection for ZeroSmog fume extraction, built ESD safe.

Applications

Micro soldering in electronics manufacturing, repair and rework on SMD assemblies, test areas, prototype build and laboratory work. Covers the smallest package sizes through to standard joints.

Compatibility and scope of delivery

The set contains the WT1M supply unit for 230 V, the WTMP MS soldering pencil with 40 W at 12 V, the RTM 013 S MS micro tip and the WSR 205 safety rest with stop and go. Further RTM tips and further WT range tools can be added. The station can be connected to ZeroSmog fume extraction.

Standards and compliance

ESD safe according to the manufacturer and intended for EPA workstations to IEC 61340-5-1. Manufacturer details under GPSR, WELLER Tools GmbH, Carl-Benz-Strasse 2, DE-74354 Besigheim, www.weller-tools.com.