ESD laboratory swivel chair LABSIT 4 with seat-stop castors and foot ring, black - Bimos 9125E-MG01-3218

The LABSIT 4 works at laboratory bench height. Seat height runs from 560 to 810 mm and the foot ring on the aluminium base takes the weight of the legs once the feet no longer reach the floor. Seat-stop castors brake under load, so the chair does not roll away as you sit down.

Key benefits

• Seat-stop castors brake as soon as weight rests on the seat. They release again when you stand up, so the chair can be moved along the bench.
• A 3D flex function in the backrest and a yielding front seat edge allow movement without giving up support.
• Height-adjustable foot ring on the five-arm aluminium base, matched to the 560 to 810 mm seat height range.
• The 420 mm backrest carries a handle on its upper edge, which makes the chair easy to reposition in a narrow laboratory aisle.
• Black seat shell with Magic imitation leather upholstery. The closed surface traps no chemical residue in seams and takes a damp wipe.
• Listed as ESD capable in the property table, so the chair belongs at workstations protected against electrostatic discharge.

Applications

Laboratory benches in analysis, sample preparation and quality control, plus inspection and measuring stations in electronics manufacturing where electrostatic discharge has to be avoided.

Accessories and scope of delivery

The LABSIT range includes the 9128 clip for colour-coding individual chairs. The matching LABSIT laboratory stool 9127-2000 and its ESD version 9127E-2000 round out the seating. Replacement castors come as the five-piece seat-stop castor set 807. One chair is supplied per sales unit.

Standards and compliance

The property table lists the chair as ESD capable, which makes it suitable for workstations protected against electrostatic discharge to DIN EN 61340-5-1. Load rating, resistance to ground and cleanroom class are not stated in the supplier data.