Soldering tip S2, 3.9 x 1 mm, C210 series, for T210-A and T210-NA irons - JBC C210042

A large joint needs mass at the tip, otherwise the temperature collapses on contact. This C210 series cartridge in the S2 shape with 3.9 x 1 mm brings that mass to the T210-A precision handle and to the T210-NA nitrogen iron.

Key benefits

• C210 series cartridge with an integrated heater, the heat is produced right in the tip instead of a remote heating element.
• Working size of 3.9 x 1 mm covers the larger joints on a T210 for which a fine needle tip offers too little contact area.
• Tool free change at the handle, so swapping a tip interrupts the work only briefly.
• Fits T210-A and T210-NA, the same tip runs on the standard iron and on the nitrogen iron.
• Sold in units of one, so a single worn tip can be reordered on its own.

Technical data

Applications

Fine soldering and rework on populated boards, prototype work, laboratory and repair shop, wherever a T210 alternates between fine and larger joints.

Compatibility

Tip series C210 for the T210-A and T210-NA handles. The series is not interchangeable with the C245 or C115 cartridges.

Standards and compliance

The manufacturer property table does not declare this cartridge as ESD safe. Manufactured by JBC Soldering SL in Molins de Rei, Spain.