Soldering tip S2, Ø 3.9 mm, C210 series, for T210-A and T210-NA irons - JBC C210041

Round joints on pins and terminals need a tip that wraps around the wire instead of merely touching it. This C210 series cartridge in the S2 shape with Ø 3.9 mm works on the T210-A precision handle and on the T210-NA nitrogen iron.

Key benefits

• C210 series cartridge with an integrated heater, the heat is produced in the tip and has no long path to travel.
• Round cross section of Ø 3.9 mm puts a large contact area against the terminal.
• Tool free change at the handle, moving to a finer tip takes seconds.
• Fits T210-A and T210-NA, the same tip runs on the standard iron and on the nitrogen iron.
• Sold in units of one, so a single worn tip can be reordered on its own.

Technical data

Applications

Hand soldering and rework on populated boards, pin and connector soldering, prototype work, laboratory and repair shop.

Compatibility

Tip series C210 for the T210-A and T210-NA handles. The series is not interchangeable with the C245 or C115 cartridges.

Standards and compliance

The manufacturer property table does not declare this cartridge as ESD safe. Manufactured by JBC Soldering SL in Molins de Rei, Spain.