19-piece ratchet screwdriver set with reversible ratchet and 1/4 inch bits - Weller XL70N

Cross recess and slotted screws inside tight assemblies cost time as soon as the handle can no longer be turned through. This 19-piece set answers that with an offset reversible ratchet that keeps working over a few degrees of swing and with 16 bits on a 1/4 inch hex shank.

Benefits in use

• 19 pieces in one case, among them 12 Allen hex bits, 4 screwdriver bits, an adapter bit, the reversible ratchet and a spinner extension.
• Offset ratchet with a lever for clockwise and counterclockwise drive, the tool stays in the screw where swing room is limited.
• Bits on a 1/4 inch hex shank, the widespread standard size, so the set can be extended with commercially available bits.
• Black oxide coated steel bits, the coating adds edge strength and protects against corrosion.
• Spinner extension for running long screws down quickly, the final tightening is then done by the ratchet.
• Red plastic case measuring 190.5 by 127 by 40.64 mm, every part has a fixed place and a missing one shows at once.

Applications

Assembly, disassembly, adjustment and repair on equipment, controls, test benches and machine panels with cross recess, slotted and hexagon socket screws.

Note on ESD suitability

The manufacturer lists this tool as not ESD compliant in the property table. For workplaces under IEC 61340-5-1 choose a screwdriver with a dissipative handle.