ESD precision tweezers type 5, very fine sharp tip, 110 mm, rubber grip - JBC HPTR-5SA

The smaller the part, the narrower the tip has to be. The HPTR-5SA relies on the very fine, sharply tapered type 5 shape over 110 mm tool length and reaches packages that a type 3C already covers up.

Benefits in use

• Type 5 tip shape, very fine and sharp, for chip packages, thin wires and individual leads.
• Tool length 110 mm, compact format for concentrated work under the microscope.
• ESD rubber grip, listed as ESD safe in the property table, with an ergonomic contact area.
• High quality tip finish so the component does not slip while being picked.
• Straight leg alignment, the tips meet without lateral offset.
• Sales unit 1 piece, packaging size 146 x 62 x 24 mm.

Technical data

Applications

Fine placement and rework on SMD assemblies, test and measurement benches, microscope work, laboratory and cleanroom as well as watchmaking and precision mechanics.

Compatibility and scope of delivery

The HPTR line groups several tip shapes around the same ESD rubber grip, so a bench can be equipped to match the component mix. The tips are fixed to the tool and cannot be exchanged. One tweezer is supplied per sales unit in a 146 x 62 x 24 mm blister pack.

Standards and conformity

The manufacturer's property table lists the tool as ESD safe and the handle as ESD rubber. No resistance value in ohms is stated there, so for documenting an EPA to IEC 61340-5-1 the measured value has to be requested from the manufacturer.