ESD precision tweezers type 0C9, sharp tip, short 90 mm shaft - JBC HPTR-0C9SA

Under a microscope and inside a populated assembly every millimetre counts. The HPTR-0C9SA measures only 90 mm and still brings straight, fine and sharp tips to the component.

Benefits in use

• Tool length 90 mm, the shortest version in the HPTR line, for confined work areas.
• Type 0C9 tip shape, straight, fine and sharp, for small components and individual leads.
• The short shaft moves the grip point close to the tip and increases control.
• ESD rubber grip over the full holding length, listed as ESD safe in the property table.
• Finely worked tips for a secure hold without a second grab.
• Sales unit 1 piece, blister pack 146 x 62 x 24 mm.

Technical data

Applications

Work under microscope and magnifier lamp, rework in densely populated assemblies, test bench, laboratory and cleanroom as well as precision mechanics.

Compatibility and scope of delivery

The HPTR line groups several tip shapes around the same ESD rubber grip, so a bench can be equipped to match the component mix. The tips are fixed to the tool and cannot be exchanged. One tweezer is supplied per sales unit in a 146 x 62 x 24 mm blister pack.

Standards and conformity

The manufacturer's property table lists the tool as ESD safe and the handle as ESD rubber. No resistance value in ohms is stated there, so for documenting an EPA to IEC 61340-5-1 the measured value has to be requested from the manufacturer.