8767 A VDE HF TORX Zyklop bit socket insulated with holding function, 1/4", TX 25 x 46 mm - Wera 05005923001

Driving TORX screws under voltage in hard-to-reach areas often leaves no second hand free to hold the screw. The 8767 A VDE HF bit socket TX 25 holds the screw securely on the tool thanks to its holding function and is extremely short at an overall length of 46 mm.

Benefits

• Holding function: the geometrically optimised HF tip wedges TORX screws by surface pressure, so the screw is not lost when feeding it in.
• Extremely short and compact design for easy working in very confined spaces.
• Individually tested at 10,000 volts as per IEC 60900 for safe working up to 1,000 volts.
• 2-component insulation: the yellow insulation core becomes visible if the red outer layer is damaged.
• Plastic sleeve protects surfaces from damage.

Applications

TORX socket screws in control cabinets, distribution boards and electrical equipment where live working may be required, used with the Zyklop VDE ratchet or insulated extensions.

Standards and safety

Insulated tool as per IEC 60900, each piece tested at 10,000 volts and approved for a voltage of 1,000 volts.