Kraftform Kompakt VDE Safe-Torque Speed switch cabinet set Basic 2, 11 pieces, 2.4-4.0 Nm - Wera 05006635001

For tightening terminals and screw connections in switch cabinets to a defined torque, this set brings everything together in one textile box: a 7516 VDE Safe-Torque Speed torque screwdriver with five pre-set values between 2.4 and 4.0 Nm, an 817 VDE handle and 9 VDE blades, each 157 mm long.

Benefits

• Speed: The tightening torques 2.4 / 2.8 / 3.2 / 3.6 / 4.0 Nm are set very quickly via the slide switch, with a digital torque value display.
• Safe: Slip-over torque function that cannot be overtightened, for clockwise and counterclockwise operation, with a clearly audible and tactile signal when the set torque is reached.
• Torque Lock: Fixed position for high tightening and loosening moments without torque limitation.
• VDE blades with reduced blade diameter (iS) reach even low-lying screw and spring elements.
• Take it easy tool finder: colour coding by profile and laser-engraved size indication, plus spinning function and anti-roll protection.
• Compact and stable textile box with Wera 2go compatibility.

Applications

Switch cabinet construction, wiring of terminal blocks and circuit breakers, installation and service on electrical systems up to 1,000 V, wherever tightening torques between 2.4 and 4.0 Nm must be observed.

Standards and safety

Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts in accordance with IEC 60900. This ten-times-higher testing load guarantees safe working at the maximum permitted voltage of 1,000 volts. The torque screwdriver and handle are intended solely for Wera VDE blades.