Series 7400 Kraftform torque screwdriver 7461, 1.2-3.0 Nm, factory pre-set, handle 105 mm - Wera 05074716010

Wherever the same torque is required again and again and repeat accuracy counts, a fixed-setting torque screwdriver saves the user from adjusting it. The Wera 7461 is factory pre-set to a value of the customer's choice between 1.2 and 3.0 Nm and gives a distinct signal when it is reached.

Benefits

• Customised factory pre-set value, only adjustable with an extra tool
• Distinct signal when the pre-set value is reached
• Unlimited loosening torque for slackening stuck screws
• Rapidaptor quick-release chuck: insert the bit without moving the sleeve, push the sleeve forward to remove it, all with one hand
• Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand

Applications

For series assembly, production and service whenever the same torque has to be applied repeatedly. Please note: 1 Ncm = 0.01 Nm. The value can be changed within the measuring range with re-calibration kit 05137001001 and then checked using an off-the-shelf torque tester.