Yellow support panel with English operating instructions for Wristlab II - Iteco 9264962

Anyone setting up a Wristlab II test point at the EPA entrance or replacing a damaged panel needs the yellow backing plate as a carrier and as an operating aid. This panel is part of the complete wall station Iteco 9264950 and is available here as a single item in the English language version.

Features

• The signal yellow surface makes the personnel check point at the EPA entrance visible from several metres away.
• The printed sequence in English takes the operator step by step through the measurement of wrist strap and footwear.
• The panel holds the Wristlab II tester and keeps it at a constant height and position on the wall.
• Supplied as a single item without tester and without footplate, it is the low cost replacement when only the panel is damaged or soiled.
• Iteco offers the panel in several language versions, this item is the English one for international sites.

Applications

Building a new personnel check point at the entrance to the EPA, replacing a damaged or illegible panel, converting a site to English language operating instructions.

Compatibility and scope of supply

The panel is intended for the Wristlab II test station. A complete check point also requires the tester Iteco 9264960 and the dual footplate Iteco 9264965. For free standing installation Iteco offers the stand 9264953.

Standards and origin

The test described on the panel follows IEC 61340-5-1 for the protection of electronic devices from electrostatic discharge. The accessory is made in Italy.