LED surface-mounted luminaire MACH LED PLUS.forty MLAL 27 S, 365 mm, 10.5 W, 40 degree optics - Waldmann 113162000-00660681

When the light has to reach the machining point from a greater distance, the MACH LED PLUS.forty MLAL 27 S uses a 40 degree optic instead of a wide-spreading reflector. It concentrates 1120 lm at 10.5 W power consumption over a length of 365 mm and puts the output where deep or tall working areas have to be lit.

What the luminaire delivers in operation

• Optic with a 40 degree angle of illumination for targeted lighting over longer distances inside the working area
• 1120 lm at 10.5 W, the highest luminous flux of the 365 mm length in the CLASSIC version
• 365 mm length at 40 mm housing diameter, suitable for restricted installation space
• Degree of protection IP67, watertight and oiltight and therefore resistant to cooling lubricant and splash water
• Vibration resistant from 10 to 55 Hz at 0.35 mm amplitude, shock proof up to 50 g
• LED service life L70 above 60 000 h, which keeps maintenance intervals long
• 20-year Waldmann manufacturer's warranty, including LED light source and driver (Waldmann general warranty terms, purchase in the EEA)

Applications

• Machine tools with a deep or tall working area where the luminaire sits far from the machining point
• Machining centres and production cells with restricted installation space
• Areas with cooling lubricant, oil and splash water thanks to IP67
• Machines with vibration loads up to 55 Hz

Connection and mounting

The luminaire is connected with 20-28 V DC through an A-coded M12 plug-in connector. It works without a built-in operating device, for operation on mains voltage Waldmann offers 24 V DC constant voltage units as accessories. Mounting is done with luminaire brackets from the accessory range, at least two brackets are required per luminaire.

Made in Germany. The luminaire is designed to be repairable.