Preheater for PCBs up to 51 x 61 cm, 230 V, 6 zones - JBC PHXLE-2A

The JBC PHXLE-2A is a large-area preheater for reworking multilayer PCBs. It brings the board to an even temperature before soldering and avoids the thermal shock that can cause delamination or solder-joint cracking on large, dense boards. This version is supplied without a board holder.

Benefits

• Heating area up to 510 x 610 mm for big-sized assemblies such as communications and aerospace electronics
• Six independent heating zones (255 x 203 mm each) that can be switched on or off to heat only the area you need
• 5400 W peak power for fast, even heating across large surfaces
• Temperature range 50-250 °C with Power, Temperature and Profile modes
• Up to 22 temperature profiles with multiple steps each for repetitive soldering jobs
• Eight Type-K thermocouple connectors for accurate temperature monitoring on the board
• USB port for firmware updates

Applications

Suited to repetitive soldering work on large-format assemblies such as communication boards and aerospace electronics. Zone-by-zone control lets you preheat selected areas of the board only.

In the box

• Heater unit
• Console
• 3x PH218 thermocouples (Type K)
• 1x PH217 Kapton tape
• Instruction manual

Note: board holder not included. The matching PHXLS support for boards up to 510 x 610 mm is available separately.

Standards

ESD safe to ANSI/ESD S20.20. Made in Spain. CE, RoHS.