Universal insulation stripper with opening spring, black atramentised, 160 mm, blister card - Knipex 11 02 160 SB

Anyone connecting conductors to terminals and connectors has to remove the insulation and leave the conductor underneath intact. The 11 02 160 SB insulation stripper is set to the wire or strand diameter with a knurled screw and lock nut and handles solid, stranded and fine-stranded conductors with plastic or rubber insulation up to 5 mm diameter or 10 mm² cross-section.

Benefits

• Simple adjustment to the required wire or strand diameter with the knurled screw, the lock nut secures the setting against being knocked out of place.
• One tool for solid, stranded and fine-stranded conductors with plastic or rubber insulation up to 5 mm outer diameter or 10 mm² cross-section.
• The opening spring returns the tool to its starting position after every stroke, which makes stripping many cores one after another far less tiring.
• Handles with multi-component grips for a secure hold.
• Black atramentised body, overall length 160 mm.
• SB version, which means the tool is supplied on a self-service card in a blister. The same tool without blister packaging is listed by Knipex as 11 02 160.

Areas of use

Electrical installation, control cabinet and control system building, vehicle electrics and service work on wiring harnesses. A fixed preset pays off wherever many cores of the same cross-section are stripped one after another and the tool should not be readjusted in between.

Note on the technical data

The manufacturer does not publish a separate data sheet page for the blister version 11 02 160 SB. EAN, weight and dimensions are therefore not stated here, because the figures of the version without blister are not confirmed for the SB version.