Diagonal insulation stripper insulated VDE, stripping holes 1.5 and 2.5 mm², 160 mm, self-service blister - Knipex 14 26 160 SB

On a distribution board, cables have to be stripped and cut to length, often close to live parts. The 14 26 160 SB diagonal insulation stripper combines precision stripping holes for 1.5 and 2.5 mm² with a long cutting edge for NYM cable up to 5 x 2.5 mm² and carries insulated multi-component sleeves.

Benefits

• Insulated handles with multi-component sleeves, VDE tested for live working.
• Precision stripping holes for conductors of 1.5 and 2.5 mm², the insulation comes off without nicking the copper conductor.
• Long cutting edge for comfortable cutting of NYM cable up to 5 x 2.5 mm², which saves changing tools.
• High cutting performance thanks to the high transmission ratio, which lowers the effort on every cut.
• Induction hardened precision cutting edges with a hardness of approximately 60 HRC, so the edge stays sharp for a long time.
• Long tips for the finest cutting work even in confined spaces such as a flush-mounted box.

Version

At Knipex the suffix SB stands for the self-service pack on a blister card. Technically the tool corresponds to the 14 26 160 version, only the packaging differs. In our catalogue the article is listed under VDE tools 1000 V to IEC 60900.

Areas of use

Electrical installation and maintenance, box and distribution board assembly, servicing work where insulated tools are mandatory, as well as retail sales from a display rail.