Kraftform 7463 torque screwdriver with pistol handle, factory pre-set 4.0 Nm (4.0-8.8 Nm), 1/4" Rapidaptor - Wera 05074728001

In series production every screw must be tightened to the same torque, and a factory pre-set tool rules out setting errors. The Kraftform 7463 is pre-set to the smallest scale value of 4.0 Nm, with a measuring range up to 8.8 Nm.

Benefits

• Fixed pre-set value for constant torque and repeat accuracy, with no adjustment at the workstation.
• Value can be changed within the measuring range using the re-calibration kit 05137002001, then checked with a torque tester.
• Multi-component Kraftform pistol handle for high torque transmission and ergonomic screwdriving.
• Rapidaptor with chuck-all, rapid-in, self-lock and rapid-out for single-hand bit changes.
• Distinct signal when the value is reached and unlimited loosening torque.

Applications

Series assembly and production lines with a fixed tightening torque of 4.0 Nm, for example in equipment and machine building.

Standards and safety

For bits with 1/4" external hex drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Changing the pre-set value requires a special tool and torque test equipment.