SCS ESD shielding and moisture barrier bag, 405 x 455 mm, film thickness 0.152 mm - Desco D301618

The wide 405 x 455 mm format has room for large assemblies, several circuit boards together or components on trays that must be packed dry and ESD-safe. The multilayer nylon film shields with less than 10 nJ of transmitted energy and keeps moisture away from the contents.

Benefits

• Two protections in one film: moisture barrier and ESD shielding below 10 nJ, no second bag needed.
• EMI shielding above 40 dB: also attenuates electromagnetic interference during storage and transport.
• Heat-sealable and vacuum-capable: close it airtight, together with desiccant and a humidity indicator where required.
• Dissipative inside and outside: surface resistance below 10E11 Ohm on both sides, to EN 61340-5-1.
• Clearly marked: printed ESD warning symbol so the bag is only opened at a protected workstation.

Applications

For large-format assemblies, multi-up circuit board panels and components on trays in storage and shipping. Fill the bag inside the EPA, add desiccant, seal or vacuum-pack it and open it again only at an ESD-protected workstation. The range is available in further formats.