Dissipative fixing bar, pink, 191 mm, for Cortronic TVS shipping boxes

An assembly lying loose in a shipping box travels to the wall during transport and knocks against it. This fixing bar with a length of 191 mm clamps the packed goods inside the Cortronic TVS shipping box and keeps them clear of the edges and the lid.

Benefits

• A length of 191 mm matched to the larger box variant of the TVS range, which removes the need to cut the bar at the packing station.
• Dissipative setting, so charges drain off through the bar in a controlled way instead of building up on the goods.
• Cross section of 20 x 20 mm according to the range data, the bar is narrow and leaves most of the usable box volume free.
• Delivered ready-cut in the matching TVS box, so box and bar fit together without rework.
• Pink colouring makes the antistatic packaging material immediately distinguishable from neutral material at the packing station.
• At 0.1 kg per bar the shipping weight of the box stays practically unchanged.

Application

The bar is used at the packing station inside the EPA when circuit boards, control units or test samples are shipped individually and must not move inside the box. Two opposing bars hold the part at its edges without loading its surface. Use during in-house transport between the test area and the store is just as common, where the same box circulates several times. The bar is also available in a further length.