ESD Needle Dispenser 60 ml, 0.81 mm needle, yellow, durAstatic - Desco 35572

Flux, cleaner or oil is hard to place accurately when the bottle has a wide outlet. This dispenser meters the fluid through a needle of 0.81 mm, releasing small amounts straight onto a pad, a component or a solder joint. The 60 ml fill covers day to day use without leaving a larger container open at the bench.

Benefits

• Needle diameter of 0.81 mm keeps the dispensed amount small and the area beside the joint clean.
• 60 ml fill, so only the working quantity sits at the bench instead of an open bulk container.
• Yellow body, easy to tell apart on a mat or in a shadow board.
• Listed as an ESD liquid container of the durAstatic line and intended for use inside the EPA.
• Empty weight of 0.1 kg, the bottle is handled with one hand.
• The series also runs a finer needle diameter, so the dose can be matched by choosing the article.

Application

The usual places are soldering, test and repair benches: a drop of flux on a single joint, cleaner metered onto a swab, a small amount of oil on a mechanism. Because the needle limits the outflow, the area around the component stays dry and the container remains closed between strokes.