ESD Dispenser Bottle durAstatic, 180 ml, with Pure-Take pump, Yellow - Desco 35268

Solvent bottles sit right next to sensitive circuit boards, and an ordinary plastic bottle can charge up there. Menda durAstatic bottles are made of dissipative HDPE with an Rtt of 1 x 10⁴ to < 1 x 10¹¹ ohms and contain no migratory additives that could contaminate the contents. The Pure-Take pump has a purity protector that stops used liquid in the dish from running back into the bottle, so the contents stay clean. When locked the pump does not leak, which suits field service kits. Each stroke delivers about 0.2 ml. The bottle is yellow, so different liquids can be kept apart by colour at the workstation.

Key benefits

• Dissipative HDPE, Rtt 1 x 10⁴ to < 1 x 10¹¹ ohms per ANSI/ESD STM11.12, charge decay < 2 s
• No migratory additives, lower risk of contaminating the contents
• One-handed dispensing of about 0.2 ml per stroke into the pump dish
• Stainless steel pump with spring-loaded lid that stays open or closed, reducing evaporation and odours
• Pure-Take purity protector and locking pump, leak-free for travel
• Yellow colour to tell liquids apart

Applications

Providing isopropyl alcohol, flux remover, acetone and other cleaners at soldering stations, in rework and in assembly cleaning inside the EPA. For small quantities picked up from the dish with a swab, brush or wipe.

Standards

Resistance measured per ANSI/ESD STM11.12, charge decay tested per IEC 61340-2-3:2016.