Tente ESD swivel caster 75 mm with brake, top plate 60 x 60 mm - A1-ESD EP0806065

Anyone fitting out a trolley, a shelf unit or a workbench for the ESD protected area needs casters that do not electrically isolate the structure and that stay put during loading and unloading. This swivel caster has a 75 mm wheel, a wheel centre of electrically conductive polypropylene and a wheel brake. It is fitted with a bolt-on top plate with a mounting dimension of 60 x 60 mm.

Benefits

• Wheel centre of electrically conductive polypropylene, so the trolley stays tied into the grounding path through the caster instead of acting as an insulator.
• Tread of TENTEprene, a thermoplastic rubber in grey, non-marking and therefore free of abrasion streaks on light-coloured shop floors.
• The wheel brake blocks the wheel, so the structure holds its position during loading and testing.
• Swivel head with a double ball race keeps steering easy even when the trolley is pushed from the side.
• Sheet steel housing, bright zinc-plated and blue passivated, intended for dry indoor use.
• The 60 x 60 mm top plate bolts flat onto the frame and transfers the load across the whole plate.
• At 75 mm wheel diameter the caster covers the usual demand on indoor workshop and shelf trolleys.

Technical data

Application

Typical use is on transport and shelf trolleys, material carts, workbenches and chassis inside an EPA, wherever populated assemblies are moved and the whole structure has to stay electrostatically controlled. The brake is needed at handover and test positions where the trolley must not roll away during work. The range is also supplied in further wheel diameters, so swivel and fixed casters on one chassis can be matched to the same overall height.