ESD safety sandal FLASH 1600 S1, extra wide width 12, mesh upper - Atlas 91712

A broad foot in a normally cut sandal presses exactly where the strap pulls. The FLASH 1600 in width 12 is lasted extra wide and keeps the class S1 package to EN ISO 20345:2022. For the ESD workplace Atlas guarantees a person, shoe and floor resistance below 100 MOhm under the DIN EN 61340-5-1 measuring method, so the charge drains before it reaches a component.

What sets this model apart

• Width 12 from the Atlas multi width system, listed by the manufacturer as extra wide. It answers broad forefeet and feet that swell during the day.
• Class S1 to EN ISO 20345:2022 means a 200 joule toe cap, a closed heel area, antistatic construction and an energy absorbing heel. The open build saves weight and heat without giving up any of those four points.
• alu-tec aluminium toe cap tested at 200 joules of impact energy and 15 kN of compression. Aluminium weighs less than steel and forms no cold bridge into the shoe.
• Two hook and loop straps instead of laces. The sandal is on and off in seconds, which saves time every day where footwear is changed often.
• High tech mesh upper with air texture, plus the clima-stream concept and the aktiv-X lining. Air circulates, moisture is balanced, the foot stays cool.
• MPU INNOFLEX System with MPU REBOUND SYSTEM. The CLOUDZONE in the heel absorbs the impact and the MPU tread areas return the energy to the next step.

Technical data

Areas of use

Electronics manufacturing and test benches in summer, assembly and workshop work in warm halls, stores and picking inside the EPA, laboratory and clean areas without water on the floor. Where sharp objects may lie on the ground, specify a penetration resistant model of class S1P or S3 instead.

Standards and conformity

• EN ISO 20345:2022, safety class S1, slip resistance SR
• DIN EN 61340-5-1, person, shoe and floor resistance below 100 MOhm
• EN ISO 20345 requires an antistatic range between 10 to the power of 5 ohms (100 kOhm) and 10 to the power of 9 ohms (1000 MOhm)
• PPE regulation (EU) 2016/425, risk category 2
• DGUV rule 112-191, suitable for insoles

Sizes

Available in EU sizes 36 to 49, throughout in the extra wide width 12. The sales unit is one pair. In standard width 10 the same model is Atlas 91700.