S3 HI HRO safety boot Duo Soft 930 for hot areas, nitrile outsole, black - Atlas 9300

In foundry, forging and chemical areas the heat comes from the floor. The Duo Soft 930 HI HRO insulates the foot from below (HI) and has an outsole that withstands contact heat (HRO). It adds a stainless steel midsole, a 200 joule steel toe cap and safety class S3. PPE category III, sizes 39 to 48.

Benefits in use

• DuoSoft sole: nitrile outsole and MPU midsole bonded by direct injection. The 4.5 mm deep lug profile reduces the risk of slipping on wet or frozen ground.
• HI and HRO: the sole unit insulates against heat from below (HI) and the outsole withstands contact heat (HRO).
• Puncture-resistant midsole made of corrosion-resistant stainless steel, shaped to the last and foamed in, protects against nails and sharp objects.
• Anatomically shaped steel toe cap: protects the toes against impacts of at least 200 joules and compression of at least 15 kN to EN ISO 20345:2012.
• Toe overcap: abrasion-resistant protection, especially for kneeling work, that keeps the upper leather from wearing out early.
• Waterproof smooth leather: the approx. 2 mm full-grain cowhide keeps moisture out for several hours while staying breathable and holding its shape.
• aktiv-X functional lining: regulates moisture, dries quickly, does not bleed colour, is skin-friendly and abrasion-resistant.
• 3D cushioning system: a pressure-relieving insole and a light, responsive MPU sole reduce fatigue over a full shift.
• Suitable for orthopaedic insoles according to DGUV rule 112-191, the marking inside the shoe is decisive.

Applications

Heavy and chemical industry, metalworking plants and hot areas, plus indoor and outdoor work on wet ground.

Standards and scope of delivery

S3 to EN ISO 20345: S2 requirements plus puncture resistance and a cleated outsole. Slip resistance SRC. Personal protective equipment of risk category III under Regulation (EU) 2016/425. Scope of delivery: 1 pair in the selected size.