Bit Set with Torque Adapters 0.1 to 0.6 Nm, 51-piece in Plastic Case - Bernstein 4-970

For precision work on electronic enclosures, smartphones or fine mechanics, this 51-piece set provides six preset torque adapters from 0.1 to 0.6 Nm that turn any standard holder into a calibrated torque tool.

Advantages

• Six torque adapters, preset 0.1 to 0.6 Nm, tolerance +/-10%, factory certificate on request
• Audible click when torque is reached, adapter cannot be overtightened
• No torque lock when loosening, giving 30% higher torque without an additional tool
• Aluminum extension with 4 mm bit holder and ESD handle, resistance 10^6 to 10^9 ohm
• 42-piece C4 bit set for slot, cross-recess, Torx, hex, wrench, triangle, square, Pentalobe, SIM-eject and Tri-Point

Technical Data

Application

The adapter clamps between a holding tool and a bit, suited primarily for manual operation. With power tools, max. 100 rpm and minimum click repetition is recommended. Typical uses: electronic devices, quick-change systems, robotics, aerospace, medical technology.

Scope of Delivery

• 4-971 to 4-976 torque adapters 0.1 to 0.6 Nm (in 0.1 Nm steps) for 4 mm bits
• 6-340-3 C4 bit set, 42-piece: slot, cross-recess, Torx, hex, wrench, triangle, square, Pentalobe, SIM-eject, Tri-Point
• 6-340-2 bit extension for 4 mm bits
• 6-340-1 ESD bit holder dissipative for 4 mm bits
• 4-564 bit adapter 1/4 inch to 4 mm bits, length 42.5 mm

Standards and Delivery Data

• Adapters tested to DIN EN ISO 6789 for at least 20,000 clicks
• EAN 4250838525473
• Customs tariff number 82060000
• Country of origin Taiwan