Lift-Rotate Unit HD 2/H Size 2 LS for WT Workpiece Pallets - Bosch Rexroth 3842999024

The Lift-Rotate Unit HD 2/H Size 2 LS is a fully assembled unit for assembly lines using WT conveyor technology. It lifts workpiece pallets approximately 50 mm above the conveyor medium and rotates them by 90° or 180° - covering both square and non-square pallet formats. For BG 1 and BG 2 in the 90° version, reverse rotation takes place below the belt, reducing cycle times during pallet change. For BG 3 with 90° rotation, reverse rotation takes place above the belt. A center position is available only for BG 1 and BG 2 in the 90° version.

• Lift height approx. 50 mm above conveyor level
• 90° or 180° rotation - including non-square pallets
• Shorter cycle times through reverse rotation during pallet change
• ESD-compliant
• Fully assembled, including mounting hardware and 2 dampers for rotary end positions

Technical data

Scope of delivery

Recommended accessories

VE 2 or VE 2/D stop gate for damped stopping of the workpiece pallet prior to rotation.

Required accessories

Protective housings; supports for BG 2 from 50 kg and for BG 3 in general; cylinder switch 0830100433 for lift position sensing; sensor for rotary movement at 0°/180° or 0°/90°.