Straight output 2GB82, size 2, 1.2 to 10 Nm, 1/4 in quick-change - Bosch Rexroth 0608800078

Parts that do not sit at exactly the same height during infeed need an output with axial compensation. The straight output 2GB82 provides 20 mm of spring travel while transmitting 1.2 to 10 Nm at up to 780 rpm.

Benefits

• Axial compensation with 20 mm spring travel and 16 to 34 N spring force absorbs height tolerances and the screw's travel while it is driven in.
• The 1/4 in quick-change chuck takes hex-shank bits, which can be swapped without tools.
• Typical efficiency of 1: output torque reaches the fastener without deflection losses, the spindle stays on one axis.
• Designed to run maintenance-free for 1 million full-load cycles, which reduces line downtime.
• At 0.2 kg the module adds little to the moving mass of the spindle.

Specifications

Applications

• Joints from 1.2 to 10 Nm in series assembly
• Multi-spindle tightening systems and tightening stations on assembly lines
• Single-spindle stations on a robot or linear axis

System compatibility

• Rexroth Tightening System 350, fixtured nutrunners of size 2
• Forms the complete spindle together with EC motor, planetary gearbox and transducer
• Driven by an LTS350D or LTE350D power module or the CS351 compact system