Offset output drive 2VNB82, size 2, 1.2 to 10 Nm, 1/4 in quick-change - Bosch Rexroth 0608800608

For automated tightening in size 2, the offset output drive 2VNB82 brings a 1/4 in quick-change chuck for hex shanks to the spindle. Its installed length of 153 mm sets the distance between spindle flange and fastening point.

Benefits

• The 1/4 in quick-change chuck takes hex-shank bits, which can be swapped without tools.
• Axial compensation with 20 mm spring travel and 16 to 34 N spring force absorbs height tolerances and the screw's travel while it is driven in.
• The offset output axis allows tight hole patterns and close spindle spacing at small screw distances, with a typical efficiency of 0.9.
• Designed to run maintenance-free for 1 million full-load cycles, which reduces line downtime.
• At 0.6 kg the module adds little to the moving mass of the spindle.

Specifications

Applications

• Joints from 1.2 to 10 Nm in series assembly
• Multi-spindle tightening systems and tightening stations on assembly lines
• Fastening patterns with small spacing where straight spindles do not fit side by side

System compatibility

• Rexroth Tightening System 350, fixtured nutrunners of size 2
• Forms the complete spindle together with EC motor, planetary gearbox and transducer
• Driven by an LTS350D or LTE350D power module or the CS351 compact system