Offset output drive VNS2C152, size 3, 6 to 53 Nm, 3/8 in square with pilot - Bosch Rexroth 0608800631

Parts that do not sit at exactly the same height during infeed need an output with axial compensation. The offset output drive VNS2C152 provides 50 mm of spring travel while transmitting 6 to 53 Nm at up to 295 rpm.

Benefits

• Axial compensation with 50 mm spring travel and 14 to 38 N spring force absorbs height tolerances and the screw's travel while it is driven in.
• The pilot on the 3/8 in square guides the socket with little play and keeps it in position during automatic infeed.
• The offset output axis allows tight hole patterns and close spindle spacing at small screw distances, with a typical efficiency of 0.93.
• Designed to run maintenance-free for 1 million full-load cycles, which reduces line downtime.
• At 1.2 kg the module adds little to the moving mass of the spindle.

Specifications

Applications

• Joints from 6 to 53 Nm in series assembly
• Multi-spindle tightening systems and tightening stations on assembly lines
• Fastening patterns with small spacing where straight spindles do not fit side by side

System compatibility

• Rexroth Tightening System 350, fixtured nutrunners of size 3
• Forms the complete spindle together with EC motor, planetary gearbox and transducer
• Driven by an LTS350D or LTE350D power module or the CS351 compact system