ErgoSpin angle nutrunner ESA040G-G, 8 to 40 Nm - Bosch Rexroth 0608841227

Working from 8 to 40 Nm, the ErgoSpin ESA040G-G angle nutrunner extends the smaller ErgoSpin angle models upward. It suits assembly lines where joints with somewhat higher torque are tightened by hand.

The nutrunner is operated on a Rexroth tightening controller, either the CS351 compact tightening system or Tightening System 350. Tightening programs and limits are set there.

Benefits

• Working range 8 to 40 Nm: one tool for all joints within this torque window
• Angle design: output at right angles to the handle, for fastening points that are hard to reach from the front
• Runs on the CS351 compact tightening system or in Tightening System 350, with parameters set in the controller
• Connected via the S-... nutrunner cables for ErgoSpin handheld tools

Specifications

Applications

• Assembly lines with joints up to 40 Nm
• Rework and individual joints at manual workstations
• Fastening points with side access

System compatibility

• CS351 compact tightening system: controller and power unit in one housing for one nutrunner
• Rexroth Tightening System 350 with power unit and control unit
• S-... nutrunner cables for ErgoSpin handheld tools, length and connector shape to suit the workstation