ErgoSpin straight nutrunner ESV012-G, 1 to 12 Nm - Bosch Rexroth 0608841244

The ErgoSpin ESV012-G straight nutrunner is meant for low torques in the axial direction: spindle and handle are in line, and the working range runs from 1 to 12 Nm. This makes it easy to approach well accessible fastening points from the front.

The nutrunner is operated on a Rexroth tightening controller, either the CS351 compact tightening system or Tightening System 350. Tightening programs and limits are set there.

Benefits

• Working range 1 to 12 Nm: one tool for all joints within this torque window
• Straight design: spindle in line with the handle, for fastening points in the axial direction
• Runs on the CS351 compact tightening system or in Tightening System 350, with parameters set in the controller
• Connected via the S-... nutrunner cables for ErgoSpin handheld tools

Specifications

Applications

• Low-torque joints in the axial direction
• Well accessible fastening points from the front
• Manual workstations in small-part and device assembly

System compatibility

• CS351 compact tightening system: controller and power unit in one housing for one nutrunner
• Rexroth Tightening System 350 with power unit and control unit
• S-... nutrunner cables for ErgoSpin handheld tools, length and connector shape to suit the workstation