TASS brake test element TR1, 2 to 4 Nm - Bosch Rexroth 3609438113

For joints between 2 and 4 Nm, the TASS element TR1 provides the matching test load. It is applied directly to the spindle and delivers two torque values, the angle of rotation and a linearity result in one run. As the smallest size of the TASS elements, TR1 has a 15 mm width across flats and a length l3 of 121 mm, and weighs 0.22 kg.

Benefits

• Characteristic values M1 2 Nm and M2 4 Nm cover the working range stated in the designation, M3 is specified as 5 Nm
• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Immediate feedback after the test run, so release or readjustment can be decided on the spot
• Size TR1 at 0.22 kg with a 15 mm width across flats, easy to handle at the station

Specifications

Applications

• Regular checks of fixtured nutrunners and spindles with target values from 2 to 4 Nm
• Testing and setting nutrunners before production start or after work on the spindle
• Daily validation of tightening stations without removing the spindle

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR1 with elements from 1 to 10 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR1 fixture (Bosch Rexroth 3609438001) for fixed mounting at the test station