TASS brake test element TR1, 5 to 10 Nm - Bosch Rexroth 3609438116

Testing spindles between 5 and 10 Nm calls for a reference that works on the installed spindle. The TASS element TR1 5-10 Nm simulates the joint as a brake test element and records two torque values, the angle of rotation and linearity in a single pass. As the smallest size of the TASS elements, TR1 has a 15 mm width across flats and a length l3 of 121 mm, and weighs 0.22 kg.

Benefits

• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Suitable for short intervals, for example daily, so deviations are detected before they carry over into many joints
• Characteristic values M1 5 Nm and M2 10 Nm cover the working range stated in the designation, M3 is specified as 12.5 Nm
• Size TR1 at 0.22 kg with a 15 mm width across flats, easy to handle at the station

Specifications

Applications

• Daily validation of tightening stations in the 5 to 10 Nm range
• Setting nutrunners after maintenance or modification of the spindle
• Checks of handheld and fixtured nutrunners with a target value in this torque band

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR1 with elements from 1 to 10 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR1 fixture (Bosch Rexroth 3609438001) for fixed mounting at the test station