TASS brake test element TR2, 6 to 12 Nm - Bosch Rexroth 3609438122

A nutrunner working at up to 12 Nm should be checked against a reference regularly, without being removed from the machine. The TASS TR2 6-12 Nm brake test element is applied to the installed tool and checks torque, angle and linearity in one run. As the second size of the TASS elements, TR2 has a 30 mm width across flats and a length l3 of 176.5 mm, and weighs 1.2 kg.

Benefits

• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Immediate feedback after the test run, so release or readjustment can be decided on the spot
• Characteristic values M1 6 Nm and M2 12 Nm cover the working range stated in the designation, M3 is specified as 15 Nm
• Size TR2 at 1.2 kg with a 30 mm width across flats, easy to handle at the station

Specifications

Applications

• Regular checks of fixtured nutrunners and spindles with target values from 6 to 12 Nm
• Testing and setting nutrunners before production start or after work on the spindle
• Daily validation of tightening stations without removing the spindle

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR2 with elements from 6 to 35 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR2 fixture (Bosch Rexroth 3609438002) for fixed mounting at the test station