TASS brake test element TR2, 8 to 15 Nm - Bosch Rexroth 3609438123

The TASS element TR2 8-15 Nm lets you validate spindles where they work, in the installed state. The working range of 8 to 15 Nm defines the joints for which the element provides the test load, and the result is available right after the run. As the second size of the TASS elements, TR2 has a 30 mm width across flats and a length l3 of 176.5 mm, and weighs 1.2 kg.

Benefits

• Suitable for short intervals, for example daily, so deviations are detected before they carry over into many joints
• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Characteristic values M1 8 Nm and M2 15 Nm cover the working range stated in the designation, M3 is specified as 18.8 Nm
• Size TR2 at 1.2 kg with a 30 mm width across flats, easy to handle at the station

Specifications

Applications

• Daily validation of tightening stations in the 8 to 15 Nm range
• Setting nutrunners after maintenance or modification of the spindle
• Checks of handheld and fixtured nutrunners with a target value in this torque band

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR2 with elements from 6 to 35 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR2 fixture (Bosch Rexroth 3609438002) for fixed mounting at the test station