-
This Item:
€4,423.52Excl. 19% VAT , excl. Shipping Cost
-
Bosch Rexroth 3842557245. Section profile SP 1, L6070
€4,766.80Excl. 19% VAT , excl. Shipping Cost
-
Bosch Rexroth 3842998101. Positioning unit PE 1/P for WT 1/S WT 1/K
€1,328.58Excl. 19% VAT , excl. Shipping Cost
Electrical Transverse Conveyor EQ 1/T
- Section load up to 30 kg
- Lift cylinder – D = 25 mm
- Total stroke: 13 mm
- Motor mounting right (MA = R) or left (MA = L), with b = 160 mm also center (MA = M)
- Conveyor medium: Toothed belt with mesh top, suitable for use in an EPA
- Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
- Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
- Special models on request
ESD | yes |
Length min [L min] [mm] | 320 |
Length max [L max] [mm] | 5000 |
Scope of delivery | Two lift transverse units, completely assembled,Belt section BS 1/T,Two protective housings,Two mounting kits for the drive of the lift transverse units,Fastening material for installation between two ST 1 sections |
Preferred values [mm] | 80,120,160 |
Section load in accumulation operation [kg] | 30 |
Dry room [rF] | lt1 |
required compressed air connection [pmax] [bar] | 6 |
required compressed air connection [pmin] [bar] | 4 |
Recommended accessories | Depending on the installation situation, additional accessories may be required for transportation control:,Damper DA 1,Switch Bracket,M12x1 Sensor with Rated Sensing Range of SN 4 mm, Cannot be Installed Flush, but Rather with 0.5 mm |
Required accessories | Two throttle non-Return valves M5 for air intake throttling,Stop rail |
Weight [kg] | 0 |
| Execution | TEC |
|---|---|
| Manufacturer Nr. | 3842998013 |
| Manufacturer | Bosch Rexroth |
| Country of Manufacture | Germany |
| Weight | 0.009900 |
| HS-Code | 84313900 |
| GPSR manufacturer information | Bosch Rexroth AG, Zum Eisengießer 1, DE-97816 Lohr am Main, www.boschrexroth.com |
| Article authenticity | Original product |
| Condition of article | New |










