ESD Dispenser Bottle durAstatic, 180 ml, with One-Touch pump - Desco

Solvent bottles sit right next to sensitive circuit boards, and an ordinary plastic bottle can charge up there. Menda durAstatic bottles are made of dissipative HDPE with an Rtt of 1 x 10⁴ to < 1 x 10¹¹ ohms and contain no migratory additives that could contaminate the contents. With the One-Touch pump you press the dish down with a swab or brush, liquid rises into the dish and any excess drains back into the bottle through the opening in the centre. Each stroke delivers about 0.2 ml. The family comes in green and orange, so different liquids can be kept apart by colour at the workstation.

Key benefits

• Dissipative HDPE, Rtt 1 x 10⁴ to < 1 x 10¹¹ ohms per ANSI/ESD STM11.12, charge decay < 2 s
• No migratory additives, lower risk of contaminating the contents
• One-handed dispensing of about 0.2 ml per stroke into the pump dish
• Stainless steel pump with spring-loaded lid that stays open or closed, reducing evaporation and odours
• Embossed ESD protective symbol and measurement scale on one side
• Green and orange to tell liquids apart

Applications

Providing isopropyl alcohol, flux remover, acetone and other cleaners at soldering stations, in rework and in assembly cleaning inside the EPA. For small quantities picked up from the dish with a swab, brush or wipe.

Standards

Resistance measured per ANSI/ESD STM11.12, charge decay tested per IEC 61340-2-3:2016.