durAstatic One-Touch Dispenser 180 ml, Printed for Flux Remover, Dissipative - Desco

This Menda One-Touch dispenser for flux remover is made of durAstatic HDPE and comes in a blue and a yellow version. Both hold 180 ml, deliver about 0.2 ml with one press on the dish and have a resistance Rtt of 1 x 10⁴ to < 1 x 10¹¹ ohms. The printed "Flux Remover" marking identifies the contents without a label. Pick the colour that matches the colour scheme at your workstations.

Key benefits

• Permanently dissipative: Rtt 1 x 10⁴ to < 1 x 10¹¹ ohms, with no migratory additives that could contaminate assemblies or solder joints.
• Fast charge decay of less than 2 seconds, tested per IEC 61340-2-3:2016.
• One-handed use: press a swab or brush into the dish to get about 0.2 ml per stroke. Excess fluid drains back into the bottle through the opening in the centre of the dish.
• The spring-loaded lid of the stainless steel pump stays open or closed and keeps evaporation and odours down.
• Colour-coded bottle with printed contents and embossed ESD protective symbol helps avoid mix-ups at the bench.

Applications

Wetting swabs, brushes and wipes with flux remover when cleaning PCBs, removing flux residue and during rework at soldering stations inside the EPA. Bottle colours make it easy to keep several fluids apart at one workstation.

Standards

Resistance tested per ANSI/ESD STM11.12, charge decay per IEC 61340-2-3:2016. The bottle follows the principle of the ESD Handbook TR20.20 to replace insulative items at the workstation with dissipative ones.