ESD grounding box with 1 x DK10 and 2 x 4 mm socket, 1 MΩ each

The A1-ESD grounding box EP0102003 combines one 10 mm snap with two 4 mm sockets and so covers different connector systems at one ground point. Each connection has a 1 MΩ protective resistor; the 3 m earthing lead is connected to protective earth via a screw eyelet for an M5 thread.

Benefits

• 1 x 10 mm snap plus 2 x 4 mm socket for mixed connector systems
• 1 MΩ protective resistor per connection to IEC 61340-5-1
• Mounted at a 90-degree angle for fitting at the bench edge
• 3 m earthing lead with a screw eyelet for an M5 thread

Application

Central grounding of ESD workstations with mixed connection systems of snap and 4 mm socket.

Standards and compliance

Supports the IEC 61340-5-1 requirements for grounding within the EPA.