ESD cabinet housing 27x27E, 564x572x383 mm, inner height 300 mm, KEY Lock without cylinder - Lista 93.155

If a soldering or test station needs a few flat drawers without setting up a full cabinet, this low housing with a height of 383 mm fits the task. In the 27 x 27 E grid with a width of 564 mm and a depth of 572 mm, an inner height of 300 mm is available for fitting drawers. Drawers are not included and are ordered separately.

Benefits

• Dissipative surface: All painted parts carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• KEY Lock: Lista standard lock with interchangeable cylinder, opened and locked manually with a key. The cylinder is not included and is ordered separately, so you are free to choose the locking system.
• Freely configurable: 300 mm inner height in the 27 x 27 E grid, you put together the drawers and their front heights as needed.

Colours

Choose the ESD colour when ordering from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

Typical places are workstation systems and soldering and test stations in EPA areas of electronics production. The dissipative effect requires the cabinet to be properly grounded. The housing is fitted with Lista drawers in the 27 x 27 E grid, with front heights chosen to suit the inner height.

Notes

For loading the drawers, follow the Lista assembly instructions and loading guidelines. Stated load capacities apply to evenly distributed loads. The KEY Lock is supplied without cylinder. Please order the interchangeable cylinder separately.