ESD cabinet housing 27x36E, 564x725x283 mm, inner height 200 mm, KEY Lock - Lista 93.235

If a soldering or test station needs a few flat drawers without setting up a full cabinet, this low housing with a height of 283 mm fits the task. In the 27 x 36 E grid with a width of 564 mm and a depth of 725 mm, an inner height of 200 mm is available for fitting drawers. Drawers are not included and are ordered separately.

Benefits

• Dissipative surface: All painted parts carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• KEY Lock: The Lista standard lock with interchangeable cylinder is opened and locked manually with a key, with no battery or electronics.
• Freely configurable: 200 mm inner height in the 27 x 36 E grid, you put together the drawers and their front heights as needed.

Colours

Choose the ESD colour when ordering from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

Typical places are workstation systems and soldering and test stations in EPA areas of electronics production. The dissipative effect requires the cabinet to be properly grounded. The housing is fitted with Lista drawers in the 27 x 36 E grid, with front heights chosen to suit the inner height.

Notes

For loading the drawers, follow the Lista assembly instructions and loading guidelines. Stated load capacities apply to evenly distributed loads.